Western Cascade Container LLC
Phone: (360) 577-1377  ~  Fax: (360) 577-1388 ~  PO Box 818 Kelso, WA 98626  ~  Email: Click here →

Home Drop Boxes Nuwave Containers Hoppers Stack Bins Flatbeds Storage Box Water Tanks Roll-Off Used Hooklift Stellar Hooklift Stellar Demo Stellar Cont. Carrier Stellar Tarper Custom Eq Directions News

 

 

FLEX SERIES HOOKLIFTS

The Stellar Flex36 series hooklift is a technologically advanced hooklift that has been designed to replace ten current Stellar hooklift models with four.

These four Flex36 Series hooklifts, accommodating cab to axle measurements of 60, 84, 108 and 120 can be pressure adjusted* to accommodate lifting capacities ranging from 9,000 pounds up to 16,000 pounds depending on the GVWR of the chassis.

* Please consult Stellar Flex36 owner's manual for proper adjustment procedures.

MODEL CAPACITY REC.BODY LENGTHS HOOK HEIGHT
Flex 36 Up to 9,000 lb. (4,082 kg) 8-15' (2,438-4,572 mm) 35.63" (905 mm)
Stellar Hooklift System Stellar Flex 36 - Up to 16,000 lb. capacity
No other hooklift manufacturer currently offers the flexibility of the Flex36. The Flex36 can handle dump containers ranging from 8 to 15 and flatbeds ranging from 10 to 16 and has a lifting capacity of up to 16,000-pounds. It has a maximum dump angle of 50 degrees to 54 degrees, depending on the length of body.
  • Standard in-cab manual controls which allow for precise metering of the manual hydraulic valve.
  • Patented dump/load interface
  • Hydraulic locks to prevent cylinder movement in case of pressure loss
  • Mechanical rear body tie-down latches
  • Resettable dump/tilt tabs
  • Hydraulic rotary valve to prevent front tilt movement when the dump frame is raised
  • Full length dump frame with front saddles to support the body during the dump mode
  • DX pre-lubricated bushings used at pivot points
  • Grease zerks at all pin points to allow purging of contaminates
  • Greaseable load rollers
  • Carbon steel and zinc plated pins standard
  • Two-part polyurethane enamel
Item Description
Lifting / Dumping Capacity
A - Dump Angle
B - Lowest Hook Height
C - Effective Length
D - Truck Frame Height
E - Hooklift Height
G - Hooklift Length
H - Center of Gravity
I - Chassis Cab to Axle
J - Max. Height Loading
K - Longest Body to Dump
L - Max. Height Dumping
Shipping Weight
Hook Height
Shipping (L x H x W)
Min. Truck GVWR
Load Angle
Body Lengths*
Body Lengths**
 
60-8
Up to 9,000 (4,082 kg)
54
23.5" (597 mm)
91 (2,311 mm)
34" (864 mm)
39.5" (1,003 mm)
99.25" (2,521 mm)
43" (1,092 mm)
60" (1,524 mm)
104" (2,642 mm)
120" (3,048 mm)
141" (3,581 mm)
1,275 lbs. (578 kg)
35.63" (905 mm)
100" x 49" x 47"
10,500 lbs. (4,763 kg)
38.5
8 to 9' (2.4 to 2.7 m)
10' (3.0 m)
 
Item Description
Lifting / Dumping Capacity
A - Dump Angle
B - Lowest Hook Height
C - Effective Length
D - Truck Frame Height
E - Hooklift Height
G - Hooklift Length
H - Center of Gravity
I - Chassis Cab to Axle
J - Max. Height Loading
K - Longest Body to Dump
L - Max. Height Dumping
Shipping Weight
Hook Height
Shipping (L x H x W)
Min. Truck GVWR
Load Angle
Body Lengths*
Body Lengths**
 
84-10
Up to 16,000 (7,257 kg)
53
25" (635 mm)
115 (2,921 mm)
36" (914 mm)
41.5" (1,054 mm)
126" (3,200 mm)
58" (1,473 mm)
84"  to 96" (2,134 to 2,438 mm)
118" (2,997 mm)
144" (3,658 mm)
162" (4,115 mm)
1,360 lbs. (617 kg)
35.63" (905 mm)
126" x 49" x 47"
10,500 to 26,000 lbs. (4,763 to 11,793 kg)
35
10 to 12' (3.0 to 3.7 m)
To 13' (4.0 m)
 
Item Description
Lifting / Dumping Capacity
A - Dump Angle
B - Lowest Hook Height
C - Effective Length
D - Truck Frame Height
E - Hooklift Height
G - Hooklift Length
H - Center of Gravity
I - Chassis Cab to Axle
J - Max. Height Loading
K - Longest Body to Dump
L - Max. Height Dumping
Shipping Weight
Hook Height
Shipping (L x H x W)
Min. Truck GVWR
Load Angle
Body Lengths*
Body Lengths**
 
108-12
Up to 16,000 (7,257 kg)
54
27" (686 mm)
142 (3,607 mm)
36" (914 mm)
41.5" (1,054 mm)
154" (3,912 mm)
68" (1,727 mm)
108"  to 120" (2,743 to 3,048 mm)
135" (3,429 mm)
180" (4,572 mm)
185" (4,699 mm)
1,615 lbs. (733 kg)
35.63" (905 mm)
154" x 49" x 47"
10,500 to 26,000 lbs. (4,763 to 11,793 kg)
36
12 to 14' (3.7 to 4.3 m)
To 15' (4.6 m)
 
Item Description
Lifting / Dumping Capacity
A - Dump Angle
B - Lowest Hook Height
C - Effective Length
D - Truck Frame Height
E - Hooklift Height
G - Hooklift Length
H - Center of Gravity
I - Chassis Cab to Axle
J - Max. Height Loading
K - Longest Body to Dump
L - Max. Height Dumping
Shipping Weight
Hook Height
Shipping (L x H x W)
Min. Truck GVWR
Load Angle
Body Lengths*
Body Lengths**
 
120-14
Up to 16,000 (7,257 kg)
50
28" (711 mm)
151 (3,835 mm)
36" (914 mm)
41.5" (1,054 mm)
161" (4,089 mm)
70" (1,778 mm)
120"  to 130" (3,048 to 3,302 mm)
136" (3,454 mm)
192" (4,877 mm)
187" (4,750 mm)
1,650 lbs. (733 kg)
35.63" (905 mm)
161" x 49" x 47"
10,500 to 26,000 lbs. (4,763 to 11,793 kg)
32
13 to 15' (4.0 to 4.6 m)
To 16' (4.9 m)
 
* Recommended container / dump body length.  Assumes 3-ft. overhang from center of rear roller pin (Bumper typically 12" from center of roller pin)
** Longest recommended flatbed length.  Assumes 5-ft. overhang from center of rear roller pin
(May require bumper and latch options)
Note: Capacity is rated with water level load including weight of body

Call us today for a quote!
 

Need parts for your truck?
Download our Truck Parts
Flyer below (PDF)

Click to download

Download the Flex36 Flyer below (PDF)
Click to download

The above file(s) download requires Adobe Acrobat reader.
Click here to get Adobe Reader


 

[Home] [Up] [Flex Series] [Shuttle Series] [Slider Series] [Special Apps.]

Send mail to webmaster@westerncascade.net with questions or comments about this web site or if you experience any problems.
Copyright 2010 Western Cascade Container LLC
Last modified: 10/15/14